Info: 'Due to an internal problem the Installer is unable to proceed. Restart the computer while pressing the shift key and try again.'
DITL_247.txt
Items: (2 entries)
0:
Bounds: x1=294, y1=74, x2=362, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=361, y2=64
Type: -120
Info: 'Due to a limitation of this installer, the selected packages may only be installed on the active startup disk.'
DITL_246.txt
Items: (2 entries)
0:
Bounds: x1=297, y1=74, x2=361, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=365, y2=59
Type: -120
Info: 'The provided Serial ID has expired. You may contact Jump Developement Group by calling 412-681-2692.'
DITL_245.txt
Items: (4 entries)
0:
Bounds: x1=296, y1=74, x2=362, y2=94
Type: 4
Info: 'Update'
1:
Bounds: x1=214, y1=74, x2=286, y2=94
Type: 4
Info: 'Replace'
2:
Bounds: x1=73, y1=74, x2=184, y2=94
Type: 4
Info: 'Cancel Install'
3:
Bounds: x1=73, y1=7, x2=360, y2=70
Type: -120
Info: 'Would you like to update your existing OptiMization settings or simply replace them with the distributed settings?'
DITL_244.txt
Items: (4 entries)
0:
Bounds: x1=278, y1=84, x2=362, y2=104
Type: 4
Info: 'Retain New'
1:
Bounds: x1=192, y1=84, x2=268, y2=104
Type: 4
Info: 'Install Old'
2:
Bounds: x1=73, y1=84, x2=172, y2=104
Type: 4
Info: 'Cancel Install'
3:
Bounds: x1=73, y1=7, x2=369, y2=72
Type: -120
Info: 'Your existing OptiMization parameters for “^0” are newer than the ones being installed.Keep your newer settings?'
DITL_243.txt
Items: (4 entries)
0:
Bounds: x1=278, y1=74, x2=362, y2=94
Type: 4
Info: 'Install New'
1:
Bounds: x1=192, y1=74, x2=268, y2=94
Type: 4
Info: 'Retain Old'
2:
Bounds: x1=73, y1=74, x2=174, y2=94
Type: 4
Info: 'Cancel Install'
3:
Bounds: x1=73, y1=7, x2=364, y2=70
Type: -120
Info: 'Install the new OptiMization parameters for “^0”?(Your previous settings will be replaced.)'
DITL_242.txt
Items: (2 entries)
0:
Bounds: x1=294, y1=74, x2=362, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=343, y2=69
Type: -120
Info: 'Unable to restore your previous OptiMization parameters.'
DITL_241.txt
Items: (3 entries)
0:
Bounds: x1=217, y1=100, x2=362, y2=120
Type: 4
Info: 'Install New Settings'
1:
Bounds: x1=73, y1=100, x2=207, y2=120
Type: 4
Info: 'Undo Last Settings'
2:
Bounds: x1=73, y1=7, x2=359, y2=87
Type: -120
Info: 'Instead of installing new OptiMization settings, you may choose to undo your last installation of them.(If you choose to undo, any changes made since the last installation will be lost.)'
DITL_240.txt
Items: (3 entries)
0:
Bounds: x1=130, y1=84, x2=196, y2=104
Type: 4
Info: 'Cancel'
1:
Bounds: x1=206, y1=84, x2=362, y2=104
Type: 4
Info: 'Continue Installation'
2:
Bounds: x1=73, y1=7, x2=363, y2=80
Type: -120
Info: 'Unable to ^0. You may continue, but after installing you will not be able to revert to your previous preferences.'
DITL_239.txt
Items: (2 entries)
0:
Bounds: x1=294, y1=74, x2=362, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=357, y2=70
Type: -120
Info: 'Unable to finish writing the Size Prefs file on the startup disk! Installation cannot be completed. (Startup disk may be too full.)'
DITL_238.txt
Items: (2 entries)
0:
Bounds: x1=294, y1=74, x2=362, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=363, y2=56
Type: -120
Info: 'Unable to merge OptiMization parameters. (No Preferences folder, or new Size Prefs was not copied correctly.)'
DITL_237.txt
Items: (2 entries)
0:
Bounds: x1=294, y1=74, x2=362, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=362, y2=63
Type: -120
Info: 'Unable to finish writing the OptiMem file on the startup disk! Installation cannot be completed. (Startup disk may be too full.)'
DITL_236.txt
Items: (2 entries)
0:
Bounds: x1=294, y1=74, x2=362, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=365, y2=69
Type: -120
Info: 'Unable to configure “OptiMem Installation” disk. The floppy disk must be unlocked to complete the installation correctly. (Eject the disk and slide the lock tab.)'
DITL_235.txt
Items: (2 entries)
0:
Bounds: x1=294, y1=74, x2=362, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=359, y2=71
Type: -120
Info: 'Unable to access the OptiMem file on the startup disk! Installation cannot be completed.'
DITL_234.txt
Items: (2 entries)
0:
Bounds: x1=294, y1=74, x2=362, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=370, y2=71
Type: -120
Info: 'Failed to access the “OptiMem Installation” disk. The disk name and its file names must be unchanged to complete the installation correctly. (Use original disk.)'
DITL_233.txt
Items: (2 entries)
0:
Bounds: x1=294, y1=74, x2=362, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=359, y2=54
Type: -120
Info: 'Not enough memory is available to complete the installation of OptiMem.'
DITL_232.txt
Items: (2 entries)
0:
Bounds: x1=294, y1=74, x2=362, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=361, y2=64
Type: -120
Info: 'The volume selected for installation must be a valid startup disk (containing the system software files).'
DITL_231.txt
Items: (2 entries)
0:
Bounds: x1=297, y1=138, x2=361, y2=158
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=360, y2=124
Type: -120
Info: 'The Serial ID is printed on your proof of purchase or “Read Me First” card. Please store it in a safe place after detaching and mailing the registration card.If you do not have a valid Serial ID you may still install the one-day-demo.'
DITL_230.txt
Items: (2 entries)
0:
Bounds: x1=294, y1=74, x2=362, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=359, y2=59
Type: -120
Info: 'Please enter your organization (or other affiliation, such as “Home”) in order to personalize the installation.'
DITL_229.txt
Items: (2 entries)
0:
Bounds: x1=294, y1=74, x2=362, y2=94
Type: 4
Info: 'OK'
1:
Bounds: x1=73, y1=7, x2=357, y2=45
Type: -120
Info: 'Please enter your name in order to personalize the installation.'
DITL_228.txt
Items: (10 entries)
0:
Bounds: x1=322, y1=166, x2=390, y2=186
Type: 4
Info: 'OK'
1:
Bounds: x1=238, y1=166, x2=312, y2=186
Type: 4
Info: 'Cancel'
2:
Bounds: x1=118, y1=58, x2=376, y2=74
Type: 16
Info: ''
3:
Bounds: x1=118, y1=90, x2=376, y2=106
Type: 16
Info: ''
4:
Bounds: x1=118, y1=122, x2=376, y2=138
Type: 16
Info: ''
5:
Bounds: x1=73, y1=7, x2=387, y2=42
Type: -120
Info: 'Please personalize your copy of OptiMem with the following information:'
/DO NOT OPEN (Use Installer).rsrc/dctb_400.png){kind=link}